Takt Time Calculator
Takt time is the heartbeat of your line: the pace you must hit to meet demand. Get it from your time and demand, then check it against your cycle time. Updates as you type.
Demand & time
Use one shift or one day: keep both inputs on the same period.
Want a second look at this result?
Leave your work email if you would like the OEE Lab team to get in touch about your numbers. To keep the result, use Copy link or Print above.
No newsletter, no spam.
Hitting takt is about losing fewer seconds.
The gap between cycle and takt is usually eaten by micro-stops and speed loss you can't see. Fabrico tracks downtime live from PLCs or IoT sensors, with add-on AI cameras counting output where a machine has no usable signal and, where cameras are fitted, can stream video of a stop on request next to its machine data, so the line actually runs at the pace it's capable of.
Request a demo Contact usHow to calculate takt time
Takt time = available production time ÷ customer demand. If you have 450 minutes available and demand is 360 units, takt = 1.25 min (75 seconds) per unit: you must finish a unit every 75 seconds to keep up.
The word comes from the German Takt (a musical beat). It sets the rhythm the whole line is balanced around.
Takt vs cycle vs lead time
- Takt time: the pace demand requires (a target).
- Cycle time: how fast you actually produce one unit (reality).
- Lead time: total time from start to finished, including waiting.
The rule: cycle time must be ≤ takt time. Run cycle a little under takt to absorb variation. If cycle creeps above takt, you fall behind every unit.
A worked example: the classic takt time exercise
A packing line runs 2 shifts of 8 hours. Each shift has a 30-minute lunch, two 10-minute breaks and a 10-minute start-up meeting, and the customer orders 1,200 cases a day.
- Available time per shift = 480 - 30 - 20 - 10 = 420 minutes, so 840 minutes (50,400 seconds) a day.
- Takt time = 50,400 s ÷ 1,200 cases = 42 seconds per case.
- The check: if the slowest station needs 45 seconds, the line makes 1,120 cases a day, 80 short, an hour of work behind every single day.
The fixes, cheapest first: move work off the slowest station (the line balancing calculator shows how even the stations are), add a parallel station at the bottleneck, or add time.
Takt is the target, OEE decides whether you hit it
Takt assumes the line runs every available minute at its planned cycle. It does not: stops, slow running and rejects eat into that time, and OEE measures how much. At 75% OEE, a station with a 36-second cycle turns out one good case every 48 seconds (36 ÷ 0.75), slower than the 42-second takt, so a line that looks fine on paper still misses the order. To meet a 42-second takt at 75% OEE, the planned cycle has to be 31.5 seconds or less.
Put your own numbers through the OEE calculator, then the cycle time calculator to see your real cycle against takt.
Common mistakes
- Taking unplanned downtime off the available time. That bakes the losses into the target. Takt comes from planned time; the losses show up as the gap you have to close.
- Keeping last quarter's takt. Takt moves with demand, the cycle does not. Recalculate when orders change.
- Mixing units. Minutes on one side, seconds on the other, or pieces against cases. Convert first.
- Running cycle exactly at takt. No headroom means every small stop puts you behind. Plan the cycle a little under takt.
Takt time meets OEE: can the bottleneck keep up?
Takt time is the pace demand asks for; the bottleneck has to beat it after its losses, not on paper. Hansen's rule in Overall Equipment Effectiveness (R. C. Hansen, 2001): the step with the longest cycle sets the line, and every other step only needs to feed it.
Worked example: demand is 960 pieces in 450 available minutes, so takt = 450 × 60 ÷ 960 = 28.1 s. The bottleneck's ideal cycle is 25 s, which looks safe. At 75% OEE its effective cycle is 25 ÷ 0.75 = 33.3 s, slower than takt, so the line falls behind every shift. To hold takt it needs OEE of at least 25 ÷ 28.1 = 88.9%, or overtime. Check your own line with the OEE calculator before planning to takt.
How do you calculate takt time?
Divide available production time by customer demand for the same period. 50,400 seconds a day and 1,200 cases a day give a takt time of 42 seconds per case.
Is takt time the same as cycle time?
No. Takt time is the pace demand requires, cycle time is how long your process actually takes per unit. The cycle has to be at or below takt, with some headroom for stops and variation.
Should takt include breaks and downtime?
Use available time, net of planned breaks and scheduled stops. Don't subtract unplanned downtime; that's a loss you want cycle headroom to absorb.
What if cycle is above takt?
You can't meet demand as-is. Options: reduce cycle time (eliminate waste, balance the line), add a parallel station, or add hours. First, check whether micro-stops are silently inflating your real cycle.
How does takt relate to OEE?
OEE losses make your effective cycle slower than the nameplate. A line that should beat takt easily can still miss it once stops and speed loss are counted. See the OEE calculator.