Blog / Lean
Lean · Guide

Manufacturing KPI Board: Layout That Gets Used

OL By OEE Lab Editorial |Updated 2 November 2026 |6 min read
Short answer

A manufacturing KPI board is one wall or screen at the work area showing five to seven numbers, usually under safety, quality, delivery, cost and people (SQDCP). Each has a target, yesterday's result, a short trend and an action when it misses. A named person updates it before a fixed daily meeting. If no action follows a red mark, people soon stop reading it.

What this board is for

A KPI board covers days and weeks. It is where a team looks at yesterday and the recent trend, and decides what to do about the largest miss.

It is not the hourly board at the line, which has its own guide in the hour-by-hour production board. It is also not a replacement for your manager's weekly numbers.

A sample layout: one line, one day

SQDCP is the common layout: safety, quality, delivery, cost and people. Some sites drop people or add morale, which is fine so long as the choice is deliberate.

MeasureTargetYesterdayStatusAction, owner, date
SInjuries and near misses00Green
QFirst pass yield97.0%96.2%RedCheck label setting, Ana, Tue
DPlan attainment92.0%93.4%Green
CScrap rate2.5%2.9%RedReview start-up scrap, Ivan, Thu
PUnfilled positions on shift01RedCover from line 2, Mira, today
Example layout with hypothetical numbers and names. Every red has an action, and every green is left alone.

Notice that green rows get no attention at all. That is the point: the team's short meeting goes to the three reds.

Choosing the measures

Choose numbers the team can change, using the tests in shop floor KPIs. For a board at plant level, the measures shift upward to OEE per line and cost.

  • Safety: injuries and near misses, always first.
  • Quality: first pass yield, or defects in numbers.
  • Delivery: plan attainment or orders shipped on time.
  • Cost: scrap rate or OEE, since both turn time and material into money.
  • People: open positions, absences or skills cover.

OEE usually sits under delivery or cost, with its top three stops beside it. A separate row works too, so choose one and keep it.

Where one number comes from

Each number needs one written source and one formula, so that it means the same thing every day. Example: plan attainment of 93.4% is 17,280 good units against a plan of 18,500, taken from the shift report.

The shortfall is 1,220 units, and the board can show that beside the percentage. Most crews find a unit count easier to talk about, and the KPI formulas sheet has the rest of the math.

Show a trend, and not just yesterday

One day's result can be noise, so a board needs a short trend beside the number. Eight weeks is often enough to tell a real change from a bad day.

Target 92%888794Week 1Week 8
Example numbers. Week 3's 87% looks bad alone, but the eight-week line is rising, and the last two weeks are above target.

Use a chart with one line and one target line, big enough to read from where people stand. Anything finer belongs in a report.

Rules for red and green

Colours are only useful when everybody knows what they trigger. Write these rules on the board itself.

  • Red needs an action. It gets an owner and a date, on the board, that same day.
  • Red three days running goes up one level. That is how the supervisor or manager finds out.
  • Green needs nothing. Do not ask for a story on a day that went well.
  • Targets stay put. Change one only on a set date, and note the change. See how to set OEE targets.
  • Nobody edits a miss. If a number was wrong, note the correction and show both.

The routine that keeps it alive

1
06:30: owner updates the numbers
Yesterday's results and trend, taken from the same source each time.
2
07:00: stand-up at the board
Reds only, at most 15 minutes, with the board in view.
3
07:15: actions written
Owner and date, written while the group is still there.
4
During the day: work gets done
Solving happens at the machine, not at the board.
5
Next morning: actions checked first
Each action is closed, moved with a reason or escalated.
Example timing for a 06:00 start. Same order every day, with the same person named for each step.

The agenda for that stand-up is in the daily production meeting. A board with no meeting gets stale, and a meeting with no board drifts into opinions.

Boards in tiers

Larger sites connect boards in a chain, so that a problem can climb until it reaches someone who can solve it. Three tiers cover most plants.

TierWho stands thereReviewsSends up
1: LineCrew and team leadYesterday's misses, today's planWhat needs another team
2: AreaSupervisors, maintenance, qualityLines side by side, shared problemsWhat needs money or a decision
3: PlantPlant manager and department headsOEE per line, delivery, escalationsWhat only the business can decide
Run them in order each morning, so that one tier's issues can reach the next on the same day.

Use the same definitions at all three tiers. If each one calculates a number differently, the meetings turn into arguments about the numbers.

Whiteboard or screen?

Start with a whiteboard unless you already have data you trust. Writing the number by hand makes people notice it, and changes to the layout cost nothing.

Move to a screen when the numbers come from a system and people have stopped questioning them. Keep the same layout, and see the dashboard examples for line-level views.

Why boards fail

  • Too many numbers. With 20 KPIs, nothing stands out. Keep each area to about seven.
  • Stale results. When Tuesday's numbers are still up on Friday, the crew stops looking.
  • Office-made. The crew should help choose the measures, or they will not own them.
  • Blame. Show results by line or by shift only with care, and never by person.
  • Red with no action. After a few weeks, red stops meaning anything.

Start next Monday

Pick one line and three rows: safety, plan attainment and scrap. Name an owner, set a time, and write down the rules for red.

After a month, check how many actions actually closed. Then add rows, and use a KPI tree to check that each number connects to a plant goal.

See it live in Fabrico

The board's hardest job is getting yesterday's numbers on time and correct. Fabrico, a light MES for OEE, gives OEE per line and shift from live machine data, so the owner copies results and does not have to work them out. See how Fabrico shows OEE per line.

What people ask next

What should be on a production KPI board?

Five to seven numbers under safety, quality, delivery, cost and people, each with a target, a result and a short trend. Add an action, owner and date for any miss. The shop floor KPIs guide helps you choose.

What does SQDCP stand for?

Safety, quality, delivery, cost and people. It is a common way to group board numbers, with safety always first. Some sites use SQDC, or add a row for morale or environment.

How often should a KPI board be updated?

Once a day for the daily numbers, before the meeting and by a named person. Trend charts can update weekly. Hourly output belongs on the hour-by-hour board.

What is a tier board?

It is a board that belongs to one level of a chain, from line to area to plant. Teams meet in order each morning, so that problems can climb until someone can solve them. The daily production meeting gives the agenda for the first tier.

Should a KPI board be digital?

Not at first. A whiteboard is cheap, easy to change and forces people to engage with the numbers. Move to a screen once data is automated and trusted, and read shop floor visual management for what must stay visible.

See OEE per line and shift on your own machines

Fabrico is a light MES for OEE. It takes stops, speed and counts from PLCs or IoT sensors, with add-on AI cameras counting output where a machine has no usable signal, and operators tag the cause at the line.

Book a Fabrico demo

← More OEE Lab guides · Daily production meeting →

OEE essentials: OEE calculator · What is OEE · Six big losses · Availability · TEEP · Cost of downtime · OEE benchmark · Free OEE tracker · Free OEE software · How to track downtime · How to implement OEE · Light MES vs full MES