ISA-95 (ANSI/ISA-95, also IEC 62264) splits a plant into five levels: L0 the physical process, L1 sensing and manipulating, L2 monitoring and supervisory control, L3 manufacturing operations management (MES), and L4 business planning (ERP). Each level has its own time scale and talks mostly to its neighbours. OEE is a Level 3 result.
What ISA-95 is
ISA-95 is a standard that describes how business systems and factory systems fit together and what data they swap. The US edition is ANSI/ISA-95, and the international edition is IEC 62264.
It is a family of parts, not one page.
In short: Part 1 sets the models and terms (including the levels), Parts 2 and 4 define the data objects, Part 3 describes the activities at Level 3, and later parts cover the messages between business and factory systems.
Its best known idea is a set of levels. The levels let a plant, a vendor and an integrator use the same words.
When someone says "that belongs at Level 3", they all know what is meant.
This page describes the structure in plain words. For the exact text, read the standard from ISA or IEC.
The five levels
Some drawings put Level 2 and Level 1 together as "control". The numbers matter less than the idea: each level looks after a different time scale and talks mostly to the level next to it.
What Level 3 covers
Level 3 is the one most plants struggle to define. The standard splits manufacturing operations management into four groups of activity:
- Production operations: dispatch, execute, collect data, track.
- Maintenance operations: keep the equipment available, plan and record work.
- Quality operations: test, hold, release, record.
- Inventory operations: move and track material on the floor.
OEE belongs to the first group. It is a Level 3 result built from Level 1 and 2 signals. For what an MES is, see what is an MES.
Example: one stop, five levels
Example: a filler jams at 10:14 on Line 3. Follow the event up the model.
A bottle tips at the infeed. Product stops moving.
A photo-eye stays blocked. The infeed drive stops.
The PLC sets a fault bit and the run bit goes false. SCADA shows an alarm.
The MES opens a stop of 1.5 minutes on order 4471. The operator picks "infeed jam". OEE for the shift updates.
At order close the ERP receives 24,000 good pieces and 330 minutes. Nothing about the single jam.
Notice what each level adds. Level 1 gives a raw signal.
Level 2 gives a fault. Level 3 gives a loss with a cause and an order.
Level 4 gives a total. This is why OEE cannot be built at Level 4 alone. See MES vs ERP.
The time scale on each level
| Level | Role | Rough time frame |
|---|---|---|
| 4 | Business planning | Months, weeks, days |
| 3 | Operations management | Days, shifts, hours, minutes, seconds |
| 2 | Supervisory control | Hours down to fractions of a second |
| 1 | Sensing and manipulating | Seconds down to milliseconds |
| 0 | Physical process | Not a data layer |
These are guides, not rules. A fast MES may sample every second.
A slow process may be controlled in minutes. The point is the shape: the higher the level, the slower and wider the view.
Sort your own plant into levels
A quick exercise: list what you already have and place each item. It takes ten minutes and shows the gaps.
| What you have | Level | Gap to check |
|---|---|---|
| Photo-eye counting bottles | 1 | Is the signal wired to anything? |
| PLC with run bit and fault word | 2 | Can another system read it safely? |
| HMI screen at the machine | 2 | Does it keep any history? |
| Paper shift sheet | 3 | Rebuilt later from memory |
| Spreadsheet of stops | 3 | One owner, no live link |
| ERP production orders | 4 | No view inside the order |
A common pattern is strong Levels 1, 2 and 4, and a weak Level 3 made of paper and spreadsheets. That is the gap an MES, or a light MES, fills.
It is also why OEE often starts as a spreadsheet and then stalls.
How to use the model in a project
- Name each signal and system by level. A list with "L1 photo-eye, L2 PLC run bit, L3 stop record" ends many arguments.
- Connect neighbours first. Level 3 reads from Level 2, and sends to Level 4. Skipping a level creates fragile one-off links.
- Decide who owns each level. Usually controls engineers own L1 and L2, operations own L3, and IT owns L4.
- Agree the data at each border. What does the ERP send down? What does the MES return? Write it down.
For older machines with no network, the first step is getting a Level 1 signal at all. See retrofit sensors for OEE and PLC signals for OEE.
Common mistakes
- Treating the levels as fixed boxes. Real products cross levels. Use the model to ask what is being done, not to label a product.
- Linking the ERP straight to the PLC. The ERP then needs to understand machine tags. Let Level 3 translate.
- Forgetting security. The standard series IEC 62443 covers industrial security. Plan zones and controlled links between levels, and do not open the control network to the office network without a plan.
- Confusing it with the Purdue model. The ISA-95 levels grew out of the Purdue reference model. Network security teams use a Purdue-style drawing to plan zones. The two look alike, but they answer different questions.
To compare Level 2 and Level 3 in more detail, read MES vs SCADA. To see how big a Level 3 system must be, read light MES vs full MES.
Fabrico sits at the operations layer. It takes stops, speed and counts live from PLCs or IoT sensors (external sensors on older machines), with add-on AI cameras counting output where a machine has no usable signal, and adds the cause from the operator at the line. See how Fabrico connects machines to OEE.
What people ask next
What are the levels of ISA-95?
Five: Level 0 the physical process, Level 1 sensing and manipulating, Level 2 monitoring and supervisory control, Level 3 manufacturing operations management, and Level 4 business planning and logistics.
Is ISA-95 the same as IEC 62264?
They cover the same work. ISA-95 is the ISA standard series, and IEC 62264 is the international version. Check the edition if you need exact wording.
Where does an MES sit in ISA-95?
At Level 3. It reads from Level 2 (PLC, SCADA) or Level 1 sensors, and sends results to Level 4 (ERP). See what is an MES.
Where is OEE calculated?
At Level 3. The signals come from Levels 1 and 2, but the stop causes, orders and shift totals live in operations management. See how to calculate OEE.
Do I need to follow ISA-95 to run OEE?
No. It helps you define scope and data, and it helps when you talk to vendors, but a plant can start OEE tracking on one line without a formal ISA-95 project. See OEE data collection methods.
Related guides: MES Modules: Typical Functions, and Which First · MES vs WMS: Line, Warehouse and the Handoff · MES vs DCS: Control Loop and Batch Record